Description
 

ATUL-1020A-TB Server

Product SKUs:- AS-1020A-T A+ Server 1020A-T (Beige)
-AS-1020A-TB A+ Server 1020A-T (Black)

Motherboard:- H8DAR-T

Processor/Chipset :- CPU Dual 940-pin ZIF Sockets
-Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
-VRM x4
-Chipset HyperTransport Link
-AMD 8132 HyperTransport PCI-X Tunnel
-AMD 8111 HyperTransport I/O Hub

System Memory:- Memory Capacity Eight 184-pin DIMM sockets
-Supports up to 16 GB DDR 400 MHz memory or
-Supports up to 16 GB DDR 333 MHz memory or
-Supports up to 32 GB DDR 266 MHz memory
-Single or Dual(recommended) channel memory
-For Single CPU: Memory must be populated in the adjacent memory bank
-For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks

Memory Type:- DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs

DIMM Sizes:- 256 MB, 512 MB, 1GB, 2GB, 4GB**

Memory Voltage:- 2.5 V only

Error Detection:- Corrects single-bit errors
-Detects double-bit errors (using ECC memory)

On-Board Devices:- SATA Marvell 88SX6041 Controller
-4-Port SATA
-Host RAID 0, 1, JBOD
-Zero Channel RAID Support for Zero-Channel RAID with
-Low Profile, Supermicro All-In-One ZCR Card (AOC-LPZCR1)
(Card not included)
-IPMI Intelligent Platform Management Interface v.2.0+
(Optional: 1UIPMI-B ) 1U Support
(Optional: 1UIPMI-B + 1UIPMI-LANG) for 3rd LAN port support with IPMI
-RMM (Remote Management Module)
(Card not included)

Network Controllers :-Broadcom® 5704 Dual Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

VGA:- ATI Rage XL 8MB PCI Graphics Controller

Expansion Slots:- PCI-X 2x 64-bit 133/100MHz PCI-X (3.3V) slots
(One slot for Full-height / Half-length cards, one slot for Low-profile / Half-length cards)

Input / Output :-Serial ATA Four Serial ATA connectors
Four SATA hard drives supported

IDE:- Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices

Floppy :-1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support

LAN :-2 RJ45 LAN port

USB FUCI :- Up to 5 USB Ports 1.1 Compliant

Keyboard / Mouse :-PS/2 keyboard and mouse ports

Serial Ports :-2 Fast UART 16550 serial ports

System BIOS:- BIOS Type 4Mb Flash EEPROM with AMI® BIOS

BIOS Features:- Plug and Play (PnP)
-SMBIOS 2.3
-DMI 2.1
-ACPI 1.0
-Fan Speed Control

Chassis:- Form Factor 1U Rackmount
Model SC813T+-500

Dimensions :- Height 1.7" (43mm)
-Width 17.2" (437mm)
-Depth 25.6" (650mm)
-Gross Weight 36 lbs (16.4kg)

Available Colors:- Beige, Black

Front Panel:- Buttons Power On/Off button
System Reset button

LEDs:- Power LED
-Hard drive activity LED
-2x Network activity LEDs
-System Overheat LED
-Ports N/A

Drive Bays :- Hotswap 4 x 1" hot-swap SATA Drive Bays with SAF-TE

Peripheral Drives :-
Floppy TEAC 3.5" 1.44MB Slim Floppy Drive
CD-ROM TEAC Slim 24x CD-ROM drive

Backplane :- 4 x 1" SATA HDD Backplane

System Cooling :- Fans 4x 9cm 10,200 RPM cooling fans

Power Supply:- Cold-swappable 500W AC power supply module with PFC
AC Voltage 100 - 240V, 60-50Hz, 10 Amp Max
DC Output 5V + 3.3V = 160W
+5V 30.0 Amp
+5V standby 2.0 Amp
+12Vall 39.0 Amp Max
-12V 1.0 Amp
+3.3V 21.0 Amp

Management :- Software Optional IPMI (Intelligent Platform Management Interface) 2.0
-Super Doctor III
-Watch Dog

Power Configurations:- ACPI/API Power Management
-Wake-On-LAN (WOL) header
-Power-on mode control for AC power loss recovery
-Internal/External modem remote ring-on

PC Health Monitoring:- CPU Monitors CPU Core Voltages, +3.3V, +5V, ±12V & battery voltage
-Up to 5 fan status
-Supports System Management Utility

FAN:- Total up to 5-fan status
-3-pin fan speed control
- Temperature Monitoring for CPU, chassis, environment
- LED Overheat LED

Other Features :-Chassis Intrusion Header

Parts List - (Items Included) :-Part Number Qty Description
Motherboard / Chassis MBD-H8DAR-T
CSE-813T+-500(B)
1
1
Super H8DAR-T Motherboard
1U SC813T+-500 Chassis (B = Black)
Air Shroud CSE-PT70 1 Internal Air Shroud

Cable(s):- CBL-0061 4 SATA Cables
Fan(s) FAN-0083 4 Cooling Fan
Heatsink Components BKT-0004
BKT-0005
2
2
Heatsink Mounting Plate
Heatsink Retention

Mounting Rails:- CSE-PT51 1 1U Mounting Rail Kit
Peripheral Drives FPD-TEAC-S (B)
CDM-TEAC-24(B)
1
1
TEAC 3.5" 1.44MB Slim Floppy Drive (B = Black)
Slim 24x TEAC CD-ROM Drive (B = Black)
Power PWS-0048
CSE-PT813-PD520
1
1
SP502-1S Cold-Swappable 500W 1U power supply
Power Distributor
Riser Card CSE-RR1U-X
CSE-RR1U-XLP
1
1
1U 1-Slot 64-bit 3.3V PCI-X - Left Side
1U 1-Slot 64-bit 3.3V PCI-X Low Profile - Right Side
SATA CSE-PT39(B)
CSE-SATA-813L
4
1
1" SATA Hard Drive Trays
1U SATA Backplane

Optional Parts List :- Part Number Qty Description

-Heatsink / Retention SNK-P0012 - Please refer to our Thermal Components Matrix
-IPMI AOC-1UIPMI-B
-AOC-1UIPMI-LANG
- 1U IPMI 2.0 Riser Card
-Supermicro IPMI Gigabit LAN Card (for 3rd LAN)



                          Thank you.